CPKSoft Engineering

Web Site

Home

Products

Drivers

Support

Contact

Español

May 19, 2012

Communication drivers

All our drivers can be used with any of the following configurations:
Drivers de comunicación

Popular products

TAS-HMITalk 8.04 Unlimited License for up to 5 object instances Unlimited license t...

TAS-HMITalk 8.04 Unlimited License for up to 500 object instances Unlimited license t...

XMODBTCP Modbus TCP Protocol Drive...

TAS-HMITalk 8.04 Unlimited License for up to 50 object instances Unlimited license t...

XALSTOM Areva Alstom IEC 87...

XMODBUSB Gould Modicon Modbu...

XS7PPI Siemens S7-200 Advanced...

XELVIPD3 ElControl Energy VIPD3-485...

GetPCId.exe Utility for collecting...

XADAM Advantech Adam Series...

XNAIS NAIS Matsushita MEWTOCOL-COM...

XWIMPACC Westinghouse IMPACC System...

XND601X ADLink Technology NuDAM-601X...

XIGPL100 IG Instrumentos DataLogger...

XCONDENS System Electric Condensomatic...

XCVENETA ClimaVeneta CVM300-3000...

XABF Allen Bradley Full Duplex...

XGECALST Gec Alsthom Addressable...

XALGODUE Algodue UPM Series Universal...

XHART Rosemount Hart Revision...

Drivers

List of drivers in TAS-HMITalk 8.04 (some are not included in the standard license)

Let us know if you need help to create a specific example to test your device with any of our drivers or if you need that we develop a new driver to communicate with your field equipment. In order to test a driver you have to download the TAS-HMITalk activex component. After unzipping the zip file, be sure to register the hmitalk.ocx with regsvr32.exe. There is aditional information about TAS-HMITalk in our support blog. To open any example you will need Visual Basic 6.0. To write new applications we suggest that yo use Visual Studio Express.Net 2008 which is a free programming tool that can be downloaded at http://www.msdn.com.

XDANLOAD Driver - Emerson Daniel DanLoad 6000 Electronic Preset Protocol Driver (NOT INCLUDED)

This driver is sold separately and it is NOT included with the unlimited licenses of TAS-HMITalk. It can be used to communicate through a physical serial COM port, through a virtual COM port or through an IP port in serial-over-IP configuration.

If you have any doubt about this driver, do not hesitate to contact us.

Driver details:

XDANLOAD driver allows you to connect to the Daniel Industries DanLoad 6000 Electronic Preset Unit using a modified version of the Modbus RTU protocol through special commands 41h and 42h.

The DanLoad 6000 has two communications 'channels' (ports) with the same address that can accept commands from automation systems. The address is set on the DUART board. Address zero should not be used since only "broadcast" messages would be processed and the DanLoad 6000 would not respond to any query.

If two automation systems are connected to the DanLoad 6000, one of them is typically responsible for 'authorization', and the other one for 'monitoring' (unless the two automation systems engage in some form of handshaking--possibly via the DanLoad 6000's status bits). The DanLoad 6000 receives queries on both communications channels (possibly simultaneously) and (if the query is not a retry) queues them to a single internal process which is responsible for building the response. Thus, queries are handled on a "first come, first served" basis, but an automation system never has to wait, i.e. worst case, for longer than it takes to respond to a single query on the other channel since it will always have the next place in the queue. When a response has been built, it is handed back to the appropriate channel process, i.e. the one for which the query was received, in order to be transmitted to the automation system.

For DanLoad 6000 v5.30 and above, program code 662 must be used to configure the unit's communications address; the DUART's address switch is no longer used.

Communications are full-duplex operating as master/slave.

The maximum number of slaves on a common line (multidrop) is 32. In practice, due to cable lengths and data rates a smaller number of slaves may be necessary.

The DanLoad 6000 operates as an addressable slave station, and 'speaks only when spoken to'; this is a necessary consequence of RS- 485 multidrop communications, which requires that a slave station reply only to a message directed to it.

The DanLoad 6000 does not respond to a message that is 'incorrectly framed', i.e. not its address, an unused function code or an incorrect error check.

The DanLoad 6000 does not respond to a message that is 'incomplete', i.e. fewer or more characters than expected.

The DanLoad 6000 ignores (throws away) any characters that are transmitted to it by the automation system while it is processing a previous command from the automation system.

The DanLoad 6000 is not ready to receive characters until a few milliseconds after it has completed a transmission. The automation system should delay 50 milliseconds between receiving the last character of a message from a DanLoad 6000 and transmitting the first character of a message to the same DanLoad 6000. If necessary, this delay can be configured with the CommT3Delay property.

This driver can only be used as the master in the communication network and it does not support exception messages. The device should behave as a slave in your RS-232/485 network.

This driver supports serial-over-ethernet.

Important note:

If you communicate using a serial port, this driver can detect a DanLoad 6000 timeout condition and automatically send a Start Communications attempt followed by a command retry before abandoning the communication and throwing a communication error.

If you are using serial-over-ip with an ip-to-serial converter, the driver will not send the Start Communications command automatically and thus it should be specifically called by your application when a communication error is detected.

Supported devices

This driver can communicate with these devices, but is not necessarily limited to this list:

EMERSON DANIEL DANLOAD 6000 Electronic Presets

Command list

This driver supports the following commands. If you need to implement some other command that is not included in this list, please let us know.

Start Communications

Request Meter Values

Authorize Transaction

Configure Recipe

Authorize Batch

Start Batch

Stop Batch

End Batch

Batch Data By Component

End Transaction

Transaction Data by Component

Request Status

Clear Status

Change Operating Mode

Display Message

Clear Display

Read Input

Write Output

Reset Primary Alarms

Prompt Preset Volume

Request Preset Volume

Time-Out Operation

Meter Totalizers

Component Totalizers

Request Keypad Data

Reset Unit

Last Key Pressed

Request Stored Transaction

Request Stored Batch

See all drivers

Available licenses

TAS-HMITalk 8.04 Unlimited License for up to 5 object instances

399.00 USD

Unlimited license to build applications with Visual Basic that...
See more...

TAS-HMITalk 8.04 Unlimited License for up to 50 object instances

899.00 USD

Unlimited license to build applications with Visual Basic that...
See more...

TAS-HMITalk 8.04 Unlimited License for up to 500 object instances

1,399.00 USD

Unlimited license to build applications with Visual Basic that...
See more...

Available drivers

XABF Allen Bradley Full Duplex...

XABH Allen Bradley Half Duplex...

XABSLC5 Allen Bradley SLC-500...

XACROMAG Acromag Series 4600 I/O...

XADAM Advantech Adam Series...

XAFEISA Afeisa Industrial Microcomputers...

XAIBUS Yudian AI-BUS Protocol...

XALGODUE Algodue UPM Series Universal...

XALSTOM Areva Alstom IEC 87...

XAND4325 AND AD-4325V Weight Indicator...

XARCOMA Arcom M1 Modbus Ascii...

XARCOMB Arcom M1 Modbus RTU Protocol...

XBCOLMAN Barber Colman model MAQ...

XCAMMESA Driver for collecting...

XCATM5X Caterpillar CCM/M5X Protocol...

XCEWE Cewe Instruments Using...

XCONDENS System Electric Condensomatic...

XCOOPER Cooper Power System...

XCORSAN IG Instrumentos CORSAN...

XCVENETA ClimaVeneta CVM300-3000...

XCVMBDM Circutor CVM-BD Memory...

XCVMITF Circutor CVM-ITF/CVM-R8C...

XCVMMEM Circutor CVM-M Memory...

XCVMMOD Circutor CVM-BD-M Modbus...

XCYBELEC Cybelec DNC-20 Protocol...

XDANIELA Daniel Industries Devices...

XDANLOAD Emerson Daniel DanLoad...

XDLXVIP Algodue Elettronica DLX...

XDUCATI Ducati Mach-Smart Analyzer...

XDX9100 Johnson Controls Metasys...

XELVIPD3 ElControl Energy VIPD3-485...

XELVIPEN ElControl VIP Energ...

XEXEMYS Exemys SSE232 Serial/Ethernet...

XFOX760 Foxboro 760CNA/760CSA...

XFOX761 Foxboro 761CNA/761CSA...

XFOX762 Foxboro 762C/762CSA/743CB...

XGATECIT Gatecit Additive Injectors...

XGAVAZZI Carlo GAVAZZI Instruments...

XGECALST Gec Alsthom Addressable...

XGEFAN90 GE Fanuc Series 90 SNP-X...

XGEMLINK General Electric M-LINK...

XGLOBALW Global Weighing MP 30...

XHART Rosemount Hart Revision...

XHITACHE Hitachi PLCs EB/EC/EM-II...

XHITACHH Hitachi PLC Serie H Protocol...

XHITAS10 Hitachi HIDIC S10 Alpha...

XIDECM3 Idec Izumi Micro3 Programmable...

XIDECONC Idec Open Net Controller...

XIEARING IEA Single-Loop Controllers...

XIGDL2CH IG Instrumentos DataLogger...

XIGEVAPO IG Instrumentos Evaporimeter...

XIGPL100 IG Instrumentos DataLogger...

XINTERGY Swichtec SM20/Sm50 Intergy...

XIZUMFA3 Izumi FA-3S/FA2-5M Communication...

XIZUMIFA Izumi FA-1/1J/2/2J Peer...

XIZUMINT Izumi FA-1/1J/2/2J Network...

XKMOELLR Hitachi PLC Serie H Protocol...

XKOYO305 Koyo DL305 PLC Family...

XKOYO405 Koyo DL405 PLC Family...

XLENNOX Lennox IMC System Bus...

XLOGNET Tecnotrol LogicNET Communication...

XMBENRON Modbus Enron ASCII Protocol...

XMELSECA Mitsubishi Melsec-Q A-Compatible...

XMITSUFX Mitsubishi PLC FX Series...

XMODBTCP Modbus TCP Protocol Drive...

XMODBUSA Gould Modicon Modbu...

XMODBUSB Gould Modicon Modbu...

XMODEM Hayes Compatible Modem...

XN2 Johnson Controls N2 Master...

XNAIS NAIS Matsushita MEWTOCOL-COM...

XND601X ADLink Technology NuDAM-601X...

XOMRON Omron Sysmac C20H/C28H/C40H...

XOPTOMUX Opto22 I/O Optomux Modules...

XPOW3300 Power Measurement 3300...

XPOW3710 Power Measurement 3710...

XPOW3720 Power Measurement 3720...

XPOW6200 Power Measurement 6200...

XPOW7300 Power Measurement 7300/7330...

XPROT200 ABB Procontic T-200 Protocol...

XREDLION Red Lion Counters Protocol...

XRIAC Micro Axial RIAC Remote...

XROC300 Fisher Controls ROC300...

XS5CP521 Siemens S5-90U/95U/100U...

XS5CP524 Siemens S5-115U/135U/150U...

XS7MPI Siemens S7-300/400 MPI...

XS7MPITP Siemens S7-300/400 MPI...

XS7PPI Siemens S7-200 Advanced...

XSAIADAT Saia PCD3 Series S-BUS...

XSAIAPCD Saia PCD Series Point...

XSAIASS0 Saia PCD Series S-BUS...

XSAMCPU2 Samsung FARA PLC CP...

XSAMSECT Samsung SECTOCOL-COM/N70/N700...

XSCD80 Caipe SCD 80 Programmable...

XSHISD20 Shimaden SD20 Serie...

XSHISR50 Shimaden SR50 Serie...

XSIM4100 Simplex 4100 Fire Alarm...

XSIXNET SixNet GTU Protocol Drive...

XSQUARED Square-D SY/MAX Point-to-Point...

XSUCOMA Klockner-Moeller SUCOM-A...

XSYLVAC Sylvac Measuring Instruments...

XTEST Serial Line Testing Master...

XTIS305 Texas Instruments TI-305...

XTIS405 Texas Instruments TI-405...

XTIS505 Texas Instruments TI-505...

XTIS505T Texas Instruments TI-505...

XTSXNANO Telemecanique TSX Nano...

XTWIDOS Schneider Electric Telemecanique...

XTWIDOT Schneider Electric Telemecanique...

XTXM IG Instrumentos TECPET/MNT...

XUDC3000 Honeywell UDC 3000 Universal...

XUDC9000 Honeywell UDC9000 Controllers...

XUMC600 Umc600 Weight Indicator...

XVILTER Vilter Compressors Protocol...

XWIMPACC Westinghouse IMPACC System...

XWITNET WIT-NET TRSII v4.7 Protocol...

XYOKOUT Yokowaga UT35/UT15/UM05...

XYOKUT37 Yokogawa UT37/UT38 Controller...

XYUYAO Yuyao Changjiang Temperature...

XZET173X Zetron M173X Controller...

XZETMODB Zetron M1708/1716 Modbus...

XZETRON Zetron M1700 Controller...

Home :: Products :: Drivers :: Support :: Contact :: Español