skip to the main content area of this page
Driver Details

Download complete driver list...


 

XS7PPI: Siemens S7-200 Advanced PPI Protocol Driver v10.0


XS7PPI: Siemens S7-200 Advanced PPI Protocol Driver

General Information:


The XS7PPI driver can be used to read or write data from or to PLCs of the S7-200 series that use the Siemens Point To Point Advanced PPI Communication Protocol over a RS-485 link multi-master networks using the Siemens multimaster cable configured as multimaster.

The RS-232 serial cable specification that was successfully tested with this driver is as follows:
  • Cable PC/PPI multimaster

  • 6ES7 901-3CB30-0XA0

  • E-STAND:03


  • Suggested Cable Dip Switches Configuration:

  • 1 0

  • 2 1 9600 bauds

  • 3 0

  • 4 X Spare

  • 5 1 Multimaster

  • 6 0 Local DCE

  • 7 0 11 bits

  • 8 X Spare

  • Important note:

    The suggested configuration will only work for this driver. If you want to communicate using MicroWin, you will need to set dip switch 5 to 0 in order to have the cable work as Freeport/PPI instead of Multimaster. Besides, you will need to uncheck the "Multimaster" and "Advanced PPI" options in the MicroWin configuration. Set dip switch back to 1 if you want to communicate using this driver.

    COM SETTINGS:

    Typical COM port settings are:
    9600, N, 8, 1 9600, E, 8, 1 115200, N, 8, 1. 115200, E, 8, 1.

    Available Commands:



    Supported Devices:

    (This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


    This driver includes:



    Available Downloads:



    To purchase a license please contact Engineering CPKSoft to any of our contact options.
    Return to All Drivers
    Licenses

    The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

    After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

    The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.