skip to the main content area of this page
Driver Details

Download complete driver list...


 

XPOW7300: Power Measurement 7300/7330 ION Protocol Driver v10.0


XPOW7300: Power Measurement 7300/7330 ION Protocol Driver

General Information:


XPOW7300 driver allows you to connect with POWER MEASUREMENT 7300 ION and 7330 ION Power Meter Series.

The link is established using the 7300/7330 ION/Modicon Modbus Serial Communications Protocol using the ION/Modbus Register Map. The 7300/7330 ION performs Modbus communications by emulating the Modicon 984 Programmable Controller. The purpose of this driver is to allow measured data to be efficiently transferred between a 7300/7330 ION and your application.

The 7300/7330 ION is capable of communication on both the RS-232C and the RS-485 serial communication standards. The RS-485 medium allows for multiple devices on a multi-drop network, whereas RS-232C allows for only a single device. The 7300/7330 ION Modbus protocol is identical for both environments.

All communications on the communications loop conforms to a MASTER/SLAVE scheme. In this scheme, information and data is transferred between this driver and up to 32 SLAVE monitoring devices for RS-485 and only one SLAVE device for RS-232C.

This driver includes one global command that can be used to read the most relevant variables from the PML 7300/7330 ION. If you need to read other parameters or write any information to the device, consider using the XMODBUSB driver (modbus binary protocol) which is also supported by this Power Measurement family.


Available Commands:



Supported Devices:

(This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


This driver includes:



Available Downloads:



To purchase a license please contact Engineering CPKSoft to any of our contact options.
Return to All Drivers
Licenses

The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.