skip to the main content area of this page
Driver Details

Download complete driver list...


 

XPOW6200: Power Measurement 6200 ION Protocol Driver v10.0


XPOW6200: Power Measurement 6200 ION Protocol Driver

General Information:


XPOW6200 driver allows you to connect with POWER MEASUREMENT 6200 ION Power Meter Series. The link is established using the 6200 ION/Modicon Modbus Serial Communications Protocol using the ION/Modbus Register Map.

This driver includes one global command that can be used to read the most relevant variables from the PML 6200 ION. If you need to read other parameters or write any information to the device, consider using the XMODBUSB driver (modbus binary protocol) which is also supported by this Power Measurement family.

Typical communication settings:
9600, N, 8, 1 or 9600, N, 8, 2

If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.

Power meter required scale factors settings:
PVS = 1 PIS/PCS = 1 PI4S/PC4S = 1 PPS = 1


Available Commands:



Supported Devices:

(This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


This driver includes:



Available Downloads:



To purchase a license please contact Engineering CPKSoft to any of our contact options.
Return to All Drivers
Licenses

The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.