skip to the main content area of this page
Driver Details

Download complete driver list...


XMICRAP: Ditel Micra-P Kosmos Series ISO-1745 Protocol Driver v10.0

XMICRAP: Ditel Micra-P Kosmos Series ISO-1745 Protocol Driver

General Information:

The XMICRAP driver allows you communicate with the MICRA-P Process Control Indicator of the Kosmos Series from Ditel ( using the ISO-1745 protocol.


  • Refer to the RS6 interface manual available at to check the correct connections for your RS-485 link.

  • Make sure that the ProC option is set to 2 in your indicator.

  • Use an RS-232/485 converter to connect the controller to your PC.

  • Make sure that the controller station address, baudrate, parity, databits and stop bits are correctly configured in the driver and matches those used by the meter.

  • Set the driver to use 1 start bit, 1 stop bit, even parity and 7 data bits.

  • If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.

    Available Commands:

    Supported Devices:

    (This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).

    This driver includes:

    Available Downloads:

    To purchase a license please contact Engineering CPKSoft to any of our contact options.
    Return to All Drivers

    The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

    After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

    The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.