skip to the main content area of this page
Driver Details

Download complete driver list...


 

XMCCDAQ: Measurement Computing CB Modules Driver v10.0


XMCCDAQ: Measurement Computing CB Modules Driver

General Information:


The XMCCDAQ driver allows you to connect with the CB-7000 Family Network Data Acquisition and Control Modules manufactured by Measurement Computing (http://www.mccdaq.com).

An RS-232/485 converter must be used at the PC side.

If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.

Default factory settings for these modules are:
  • Address: 01.

  • Analog Input Type: Type 05, -2.5 to +2.5 V.

  • Baud rate: 9600 bps.

  • Checksum disable, 60 Hz rejection, engineering unit format.

  • CB-7018/18P set as INIT* mode; there are six differential and two single-ended analog inputs.


  • Available Commands:



    Supported Devices:

    (This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


    This driver includes:



    Available Downloads:



    To purchase a license please contact Engineering CPKSoft to any of our contact options.
    Return to All Drivers
    Licenses

    The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

    After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

    The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.