skip to the main content area of this page
Driver Details

Download complete driver list...


 

XHITAS10: Hitachi HIDIC S10 Alpha PLC H-7338 Protocol Driver v10.0


XHITAS10: Hitachi HIDIC S10 Alpha PLC H-7338 Protocol Driver

General Information:


The XHITAS10 driver allows you to communicate with the Hitachi HIDIC S10/2 Alpha, S10/4 Alpha and S10/Mini Series PLC that use the H-7338 serial protocol.

This driver allows you to read and write over PI/O Word Format Area and PI/O Bit Type Area.

Communication specifications

1) Transfer speed S10/2 Alpha: 19.2 kbps S10/4 Alpha: 150~19.2 kbps S10/Mini: 19.2 kbps
2) Communication mode: Half duplicate transfer
3) Synchronization mode: Start-stop synchronization
4) Transmission mode: Serial Transmission
5) Transmission bit configuration: Start bit: 1 Data bit: 8 Parity bit: 1 / Odd Stop bit: 1
6) Error control: Odd parity check Inquiry check of reversal data Inquiry check of eco-data
7) Maximum numbers of word transfer 256 Words
8) Communication circuit cable: Twisted pair line with seal (KP-EV-SB-0.5 SEQ-3P) Cable length: Max 300m
9) Interface: Photo-coupler interface
Important note:

If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.


Available Commands:



Supported Devices:

(This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


This driver includes:



Available Downloads:



To purchase a license please contact Engineering CPKSoft to any of our contact options.
Return to All Drivers
Licenses

The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.