skip to the main content area of this page
Driver Details

Download complete driver list...


 

XFOX762: Foxboro 762C/762CSA/743CB Micro Controllers Driver v10.0


XFOX762: Foxboro 762C/762CSA/743CB Micro Controllers Driver

General Information:


XFOX762 driver allows you to communicate with the FOXBORO 762C and 762CSA SINGLE STATION MICRO Controllers and the 743CB FIELD STATION MICRO Controllers. This driver has been developed according to the Foxboro Instruction Book MI 018-888.

RECOMMENDATIONS:

  • Use pins 24 and 25 in the back of the controller to connect to the RS485 serial port of the controller. Check this with your controller's manual to see if this pins have not changed from previous versions of the controller.

  • Use an RS-232/485 converter to connect the controller to your PC.

  • Make sure that the controller station address, baudrate, parity, databits and stop bits are correctly configured in the driver and matches those used by the meter.

  • If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.


    Available Commands:



    Supported Devices:

    (This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


    This driver includes:



    Available Downloads:



    To purchase a license please contact Engineering CPKSoft to any of our contact options.
    Return to All Drivers
    Licenses

    The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

    After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

    The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.