skip to the main content area of this page
Driver Details

Download complete driver list...


 

XABBSRIO: ABB SRIO 500/1000M X3.28 Protocol Driver v10.0


XABBSRIO: ABB SRIO 500/1000M X3.28 Protocol Driver

General Information:


XABBSRIO allows you to use the ANSI X3.28 protocol (derived from the Full-duplex DF1 protocol) to communicate with the ABB SRIO 500M/1000M Data Communication and Reporting Unit. Exception reports or unsolicited messages are not supported so they must be disabled. The ABB SRIO device must behave as a slave unit. Suggested communication parameters are 9600,E,8,1.

If you cannot communicate or if you are using RS-485 to connect to the device, you should set the RTS signal during the communication. This can be done by setting the RTSEnable argument when calling the read and write methods. If you still cannot communicate, check that your RS-485 cables are not inverted.


Available Commands:



Supported Devices:

(This list is only indicative and may exist other unlisted equipment that are also communicable with this driver).


This driver includes:



Available Downloads:



To purchase a license please contact Engineering CPKSoft to any of our contact options.
Return to All Drivers
Licenses

The licenses of all our drivers are unlimited in terms of the number of machines where they can be used, the number of I/O that can read or written, and the number of components that can be included in each application.

After purchasing a license, the owner can use the driver and all its components to assemble and distribute as many applications to as many users as needed.

The license owner retains full control of his applications by deciding himself what target machines can they be run at. For this, each driver is provided with two runtime license management tools: GetPCId.exe and MakeLic.exe.